background image

9

Exclusive to Howdens

10

11

10

2

1

3

4

5

6

9

8

7

2. Controls overview

1.

 ON/OFF key

2.

 Sensor field

3.

 Pause key

4.

 Lock key

5.

 Warming key

6.

 Grill key

7.

 Minus key / Plus key - timer

8.

 Timer indication

9.

 Display cooking zone timer

10.

 Hob power setting

11.

 Fan power setting

The glass hob is operated with touch control 

sensor keys. The sensor keys are operated as 

follows: lightly touch a symbol on the surface of 

the ceramic glass plate. A buzzer will indicate 

when the controls have been operated 

correctly.
The touch control sensor key will then be 

indicated as ‘key’.

Permanent pan recognition 

If the hob has permanent pan recognition, a 

cooking setting can only be switched ON via 

the sensor field after a pan has been detected 

on the hob and the power display shows  .

ON/OFF key   (1)

 

This key is used to switch the hob ON/OFF.

Power boost in the sensor field 

 (2)

 

The power boost setting makes additional 

power available for induction cooking zones or 

fan.

Pause key   (3)

 

The pause function can be used to briefly stop 

the cooking process.

Recall function   (3)

 

The most recent setting can be recovered if 

the hob is switched OFF unintentionally.

Lock key   (4)

 

The lock key can be used to lock all of the keys.

Keep warm key   (5)

 

To keep warm.

Grill key   (6)

 

Grill function with a griddle plate for induction.

Minus key   /   Plus key (7)

 

These keys are used to set the timer and the 

automatic switch-off function of the cooking 

zones as well as the automatic delay stop of 

the fan.

Symbols (9)

 

 

Timer function, automatic switch-off device.

Hob power setting display   (10)

 

The hob power setting indicator shows the hob 

power setting which has been selected, or:

 

 

Residual heat 

 

Power boost 

 

Pan recognition 

 

Automatic boost function 

 

Pause function 

 

Childproof lock 

 

Bridging function 

 

Grill function 

 

Keep-warm function

Fan power setting display (11)

 

The power setting indicator shows the hob 

power setting which has been selected, or:

 

 

Automatic function 

 

Replacing the carbon filter

Most of the keys shown 

here will only become 

visible when the hob has 

been switched ON.

Содержание LAM9501





















































Отзывы: