Lamona LAM8876, Руководство пользователя и инструкции

Страница: 13 / 28

Page_13
www.howdens.com
1. Cut and edge a section of
plinth (min 600mm) in front
of the appliance.
2. Cut the plinth section to suit
the vent grille being used.
Note: Ensure sufficient space
is left for the magnet
positioning at each end.
3. Screw fix magnets to each
end of the cut plinth section
at the back of the plinth.
4. Screw fix magnets to the
back of each end of the main
plinth sections
5. Position metal plates (x2) to
the magnets so half the plate
is overlapping the end.
(Plates not supplied)
6. Fit the vent grille to the cut
plinth section and secure
in place using the screws
supplied.
7. Fit the plinth vent section to
the main plinth aligning the
magnets with the metal
plates.
600
B B A
A
A
A
A
B
B
B
B B
B B
B
A
x4
x4
Back of plinth sections,
each side of the cut section