Function Lock
This function prevents an accidental change of the heating function. You can turn it on only
when the oven works.
1.
Turn on the oven.
2.
Set a heating function or setting.
3.
Press
again and again until the display shows: Function Lock.
4.
Press
to confirm.
To turn off the function, press
. The display shows a message. Press
again and then
to confirm.
When you turn off the oven, the function also turns off.
Set + Go
The function lets you set a heating function (or a programme) and use it later with one
press of any symbol.
1.
Turn on the oven.
2.
Set a heating function.
3.
Press
again and again until the display shows: Duration.
4.
Set the time.
5.
Press
again and again until the display shows: Set + Go.
6.
Press
to confirm.
Press any symbol (except for ) to start the function: Set + Go. The set heating function
starts.
When the heating function ends, a signal sounds.
• Function Lock is on when the heating function works.
• The menu: Basic Settings lets you turn the function: Set + Go on and off.
Automatic Switch-Off
For safety reasons the oven turns off automatically after some time, if a heating function
works and you do not change any settings.
(°C)
(h)
30 - 115
12.5
120 - 195
8.5
200 - 230
5.5
The Automatic Switch-off does not work with the functions: Light, Duration, End Time.
Brightness of the display
There are two modes of display brightness:
23
