LAMONA
Appliances
10_ Installation
Installing the handle
Gently pull the door gasket to one side to reveal
the two designated holes for handle installation.
Install the handle tightly as shown below with
the two screws, and washers provided.
Reversing the door swing
This wine cooler door can open from either
the left or right-hand side. The unit is delivered
with the door opening from the left-hand side.
Should you wish to reverse the door swing,
please follow the reversal instructions below.
All parts removed must be saved to reinstall
the door
Open the door and remove the two screws (1)
under the lower right hand corner of the door
that are used to hold the pivot plate (3), to
the hinge plate (2). Be careful to support the
glass door with both hands to prevent it
dropping after removing the screws and
moving the door away from the hinge.
4
5
7
3
2
Pull down to remove the glass door and place
it on a padded surface to prevent scratching it.
Remove the right top hinge (4), and the lower
hinge plate (2).
(4)
Right Top Hinge
(5)
Door
(3)
Pivot Plate
(2)
Hinge Plate
(3)
Pivot Plate
(1)
Screws x 2
(2)
Hinge plate
3
2
1
7
8
Remove the left top hinge (6), and left lower
hinge (7) from the component bag that is
included and install them at the designated
positions at the left side of the cabinet
(pictured below).
3
2
1
4
5
3
2
Turn the glass door 180º and reinstall using
the pivot plate, tighten screws to secure the
hinge plate.
(6)
Left Top Hinge
(7)
Left Lower
Hinge
