Lamona LAM3209, Инструкции и руководство по установке, Страница: 20 / 28

LAMONA Appliances
Exclusive to Howdens Joinery.co Page _ 20
Before installation
The product should only be installed by suitably
qualifi ed persons.
The product must be installed in accordance
with all local regulations.
Prior to installation, visually check the product
for any damage/defects. Do not install if any issues
are found.
Damaged products may cause risks to your own
safety.
The appliance is intended for installation in
Installation
Howdens kitchen cabinets.
• Surfaces, synthetic laminates and adhesives
used must be heat resistant.
• Kitchen cabinets must be set level and fi xed.
• If there is a drawer beneath the oven, a shelf
must be installed between oven and drawer.
• The following installation drawings are
representational and may not match exactly
with your appliance.
560mm
560mm
585mm - 595mm
(min)
555mm
567mm
555mm
570mm
567mm
20 mm
20 mm
570 mm
min depth
570 mm
min depth
*
*
*
570mm
594mm
595mm
595mm
594mm
585 - 595mm
(min)
Note: Remove carcase rear panel to assist with
oven ventilation.
A minimum of 150cm² ventilation gap is re-
quired as Illustrated
(35mm x 500mm) cut out positioned centrally.
*
Tower Unit Installation
Built under installation