Lamona LAM2875, Руководство пользователя

Страница: 5 / 16

•
Use only the fixing screws supplied with the appliance if not
supplied, use the screws recommended in the installation
instructions.
•
Do not use adhesives to fix the appliance.
•
The minimum distance between the hob surface on which
the pans stand and the lower part of the appliance shall be
at least 65 cm, unless otherwise specified in the installation
instructions for the appliance or hob.
•
The discharge of air must comply with local authorities
regulations.
•
Ensure good air ventilation in the room where the appliance
is installed to avoid the backflow of unwanted gases into the
room from appliances burning gas or other fuels, including
open fires.
•
Make sure that the ventilation openings are not blocked and
the air collected by the appliance is not conveyed into a duct
used to exhaust smoke and steam from other appliances
(central heating systems, thermosiphons, water-heaters,
etc.).
•
When the appliance operates with other appliances the
maximum vacuum generated in the room should not exceed
0.04 mbar.
•
Make sure not to cause damage to the mains cable. Contact
our Authorised Service Centre or an electrician to change a
damaged mains cable.
•
If the appliance is connected directly to the power supply, the
electrical installation must be equipped with an isolating
device that allows to disconnect the appliance from the
mains at all poles. Complete disconnection must comply with
conditions specified in the overvoltage category III. The
means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
•
Do not flambé under the appliance.
•
Do not use to exhaust hazardous or explosive materials and
vapours.
•
Clean the appliance regularly with a soft cloth to prevent the
deterioration of the surface material.
5