Page
7
www.howdens.com
Installation
This instruction must be strictly adhered to. Failure to comply could result in overheating and
serious damage to your appliance.
It is recommended that the installation is carried out by at least two people.
1.
Mark and drill four holes using to the
dimensions shown and install the ducting facilities
(if ducting the extractor out) in the ceiling. Ensure
that the extractor is secured into joists (it may be
necessary to add wooden struts between the
joists).
188
259
259
188
H (min. 62,7cm,
max. 102,7cm)
75cm recommended
worktop
70cm minimum
2 of 6
Lower 2 holes
(62.7 to 80.3cm)
2.
Mount the upper plate onto the ceiling using 4
suitable screws and washers
2 of 6
Lower 2 holes
(62.7 to 80.3cm)
3.
Secure the ducting connector and glass canopy
to the extractor body
