Lamona LAM2505, Инструкции и установка

Страница: 14 / 17

Exclusive to Howdens Joinery.co Page _ 13
User manual LAM2505 LAM2506
TROUBLESHOOTING GUIDE
Symptoms
Possible Cause Solutions
Lamps fail to operate? •
•
•
Lamp has an internal fault.
Power is cut (extractor will not function).
Lamp has passed its usable life.
Call the authorised service agent.
Check if there is power. Check the fuses in the fuse box. If
necessary, replace or reset the fuses.
The motor is on, but fan does
as usual?
• Clogged can reduce the
product’s Check the grease
and charcoal (if also
ensure any venting is not obstructed?
Clean the grease with warm water and mild
detergent, and/or replace any charcoal
The extractor works normaly
but smells linger?
• Clogged can reduce the
product’s and may cause
unwanted smells.
Clean the grease with warm water and mild
detergent, and/or replace any charcoal
Product does not operate? • The mains fuse maybe defective or
has tripped
Check fuses in the fuse box. If necessary, replace or
reset them.
• Product is not connected properly. Check all power connections.
If you cannot eliminate the problem after following the instructions in this section, consult your
depot or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.
Troubleshooting
TECHNICAL INFORMATION
General
Total power consumption 104W
Fuse 3 A
Voltage /Frequency 220-240 V ~ 50 Hz
Cable type / section 0.75mm², 3 core or equivalent
Cable length max. 1.5m
Lamps 2W LED warm white 3000k