Lamona LAM1742, Руководство по установке пользователя

Страница: 11 / 16

_ 11
User manual LAM1742
30mm
Hob Worktop
Screw
40mm
Hob
Worktop
Screw
Worktop
25mm
oven or partition
Hob
5mm
Place the hob in the aperture, checking the hob
glass is covering the worktop along all four sides.
Set the front edge of the appliance parallel with the
front of the worktop.
Secure the hob to the worktop by means of the
brackets provided, taking the thickness of the
worktop into account.
The brackets secure directly to the base of the hob
as shown.
30mm
Hob
Worktop
Screw
40mm
Hob
Worktop
Screw
Worktop
25mm
oven or partition
Hob
5mm
Installation above an oven
If the appliance is installed with an oven
underneath, please leave atleast 25mm of
ventilation, umless otherwise stated in your oven
installation guidelines.
40mm Hob
Worktop
Screw
50mm
Hob
Worktop
Screw
30mm
Hob
Worktop
Screw
Worktop
25mm
oven or partition
Hob
5mm
If the installation is not above an oven and the
underside of the hob is accessible, a wooden shield
is required to be installed at least 15mm below the
underside of the hob unit.
15 min.
Connect to the electricity Supply
This appliance must be earthed.
The hob must be installed by a competent
electrician, using a suitable double pole control unit,
with 3mm minimum contact separation at all poles.
Connection should be made with a suitable cable.
Ensure that you route all mains electrical
cables well away from any adjacent heat source,
such as the base of the hob or oven / grill surface.
Strip the wires & connect to the terminal block as
appropriate:-
Installation
Earth (Yellow/Green)
Neutral (Blue or Black)
Live (Brown or Red)
3
2
1 4
Mains Cable
Copper Bridge
3 x 4.0 mm² 220 - 240V