LAMONA
Appliances
_ 16
Elbow installation
The pipework shall be fi tted in such a way that it
cannot come into contact with a moveable part of
the housing unit (e.g a drawer) and does not pass
through any space where it may become crushed or
kinked or damaged in any way.
To prevent any potential damage to the hob please
carry out installation as following:
1.
Assemble the parts in this order
•
1/2 Male adapter
• 1/2
Seal
•
1/2 Female gas adaptor conical - cylindrical or
cylindrical - cylindrical.
2. Tighten the joints with the spanner,
remembering to twist the pipes into position.
3. Attach fi tting C to the mains gas supply using a
rigid copper pipe or fl exible steel pipe.
IMPORTANT: Carry out a fi nal check for leaks on the
pipe connections using a soapy solution. NEVER
USE A FLAME. Also make sure that the pipework
cannot come into contact with a moving part of the
cabinet (e.g a drawer) and that is not situated where
it could be damaged.
WARNING: If gas can be smelt in the vicinity of this
appliance turn off the gas supply to the appliance
and call the engineer directly.
Do not search for a leak with a naked fl ame.
Installation above a kitchen unit
with door & drawer
The panel installed below the hob must be easy to
remove to allow easy access in case a technical
intervention is necessary.
30mm
Min 15mm
60mm
30mm
Min 15mm
60mm
Worktop
15mm
oven or partition
Hob
5mm
