Lamona LAM1005, Руководство пользователя, Страница: 16 / 24

1
_
User manual LAM1005
Elbow Installation
The pipework shall be
À
tted in such a way that it
cannot come into contact with a moveable part of
the housing unit (e.g a drawer) and does not pass
through any space where it may become crushed or
kinked or damaged in any way.
To prevent any potential damage to the hob please
carry out installation
carefully.
Tighten the joints with
suitable
spanner,
remembering to twist the pipes into position.
Attach hob À tting s to the mains gas supply using a
rigid copper pipe or Á exible steel pipe.
IMPORTANT: Carry out a
À
nal check for leaks on the
pipe connections using a soapy solution. NEVER
USE A FLAME. Also make sure that the pipework
cannot come into contact with a moving part of the
cabinet (e.g a drawer) and that is not situated where
it could be damaged.
WARNING: If gas can be smelt in the vicinity of this
appliance turn off the gas supply to the appliance
and call the engineer directly.
Do not search for a leak with a naked Á ame.
Installation above a kitchen unit
with door & drawer
The panel installed below the hob must be easy to
remove and let an easy access in case a technical
assistance intervention is necessary.
30mm
Min 10mm
60mm
30mm
Min 10mm
60mm
Worktop
10mm
oven or partition
Hob
5mm