Lamona HJA 6750, Инструкция по установке и эксплуатации, Страница: 11 / 27

10
REPOSITIONING THE DOOR
Follow the step by step instructions and the diagram below. Numbers in brackets
refer to diagrams.
1. Switch off at the socket outlet and pull out
the mains plug.
2. Remove all food, loose items and fittings
from inside the appliance and door shelves.
3. Unscrew the bolts and remove the upper and
bottom hinges from the cabinet and door.(1) (2)
4. Remove stoppers. (3) (4)
5. Fit the stoppers on the opposite side. (5) (6)
6. Reposition the upper hinge on the opposite
side as bottom hinge (7)
7. Reposition the bottom hinge on the opposite
side as upper hinge. (8) Locate the door and
tighten the bolts fixing the door.
To change door from R/H to L/H please follow procedure
below:
1. Carefully remove the lower then the upper Torx screws that hold the door to the
hinges.
2. Open hinges fully then carefully remove the self tap countersunk screws holding the
hinges to the cabinet.
3. Remove the plastic covers from the L/H hinge fixing points and carefully re insert
in the R/H holes.
4. Carefully place the self tap screws into the new fixing points applying gentle pressure
until they start to bite (at this point it may help to have someone at the back of
appliance to support).
5. For ease of fixing we recommend screwing all the way in, and then ease back out.
6. Re fit hinge
7. Tighten the screws firmly.
8. Re fit door, loosely fixing the top screws first, and then fit the lower screws.
9. When all screws fitted; tighten firmly and check door for alignment.
8
7
1
2
1
2
4
3
5
6
8
7