LAMBORGHINI R8.230 DCR, Руководство по ремонту

Страница: 18 / 51

0-6
InTroDuCTIon
fInE M8x1 20.8 – 23.0 15.3 – 17.0 30.6 – 33.8 22.6 – 24.9 35.8 – 39.6 26.4 – 29.2
M10x1.25 40.6 – 44.8 29.9 – 33.0 59.7 – 65.9 44.0 – 48.6 71.2 – 78.6 52.5 – 57.9
M12x1.25 72.2 – 79.8 53.2 – 58.8 106 – 118 78.1 – 87.0 126 – 140 92.9 – 103.2
M12x1.5 69.4 – 76.7 51.1 – 56.5 102 – 112 75.2 – 82.5 121 – 134 89.2 – 98.8
M14x1.5 114 – 126 84.0 – 92.9 168 – 186 123.8 – 137.1 199 – 220 146.7 – 162.1
M16x1.5 175 – 194 129 – 143 257 – 285 189.4 – 210.0 301 – 333 221.8 – 245.4
M18x1.5 256 – 282 188.7 – 207.8 375 – 415 276.4 – 305.9 439 – 485 323.5 – 357.4
M20x1.5 355 – 393 261.6 – 289.6 523 – 578 385.5 – 426.0 611 – 676 450.3 – 498.2
M22x1.5 482 – 532 355.2 – 392.1 708 – 782 521.8 – 576.3 821 – 908 605.1 – 669.2
M24x2 602 – 666 443.7 – 490.8 884 – 978 651.5 – 720.8 1035 – 1143 762.8 – 842.4
Fittings
The tightening torques indicated below refer to fittings assembled on any material.
Table 3
mET-
rIC
Straight end fittings T” end fittings L” end fittings 90° end fittings
Thread size Wrench Torque Nm
±10%
Wrench Torque Nm
±10%
Wrench Torque Nm
±10%
Wrench Torque Nm
±10%
M10x1.25 17 14 14 14 14 14 14 14
19 14 17 14 17 14
M12x1.25 19 30 17 30 17 30 17 30
M14x1.5 19 40 19 40 19 40 19 40
M16x1.5 22 48 22 48 22 48 22 48
M18x1.5 24 58 24 58 24 58 24 58
M20x1.5 27 65 27 65 27 65 27 65
M22x1.5 30 73 30 73 30 73 30 73
M26x1.5 36 95 36 95 36 95 36 95
M27x2 36 100 36 100 36 100 36 100
M33x2 41 160 41 160 41 160 41 160
M42x2 50 250 50 250 50 250 50 250
M48x2 60 305 60 305 60 305 60 305
G 1/8” 17 13 14 13 14 13 14 13
19 13
G 1/4” 19 37 19 37 19 37 19 37
22 37
G 3/8” 24 53 24 53 24 53 24 53
G 1/2” 27 73 27 73 27 73 27 73
30 73
G 3/4” 36 100 36 100 36 100 36 100
G 1” 41 160 41 160 41 160 41 160
46 160
G 1 1/4” 50 250 50 250 50 250 50 250
G 1 1/2” 60 305 60 305 60 305 60 305
Plugs
Table 4
Hex plugs Threaded plugs with hex socket head
Thread size Wrench Torque Nm ±10% Wrench Torque Nm ±10%