
18
SWITCH-OFF
PROCEDURE
In order to prolong your FORTADOR machine lifetime, take due care of your machine and obey the Switch-Off Procedure
as presented herein.
Switch off the machine using the button on the touch
screen, and then disconnect it from its power supply.
NOTE:
Failure to observe this sequence may result in damage to
the machine’s controller.
Disconnect the hoses, clean them and roll them up, being
careful not to exceed the allowable bending radius (min. 10
cm);
NOTE: Bending the hose to any radius that is tighter
than allowed will result in its damage!
Place the machine so that the boiler draining valve outlet
no. 14 is directed into the open space. Carefully open valve
no. 14, paying special attention to the steam that is coming
from the outlet. High-pressure steam jet may lead to serious
burns!
3
4
1
Drain the boiler completely, leaving valve no. 14 in its
open position. This valve can only be closed just before
you start your work.
Clean the machine if dirty. By cleaning the machine each
time after you finish your work, you will keep it in very good
technical condition for a long time.
Leave the machine in dry, warm area that is free from dust.
5
6
7
2
Press the gun’s trigger to release any steam that still rema-
ins inside hoses.
Содержание FORTADOR Volt Elektra
Страница 1: ......
Страница 28: ...www fortador com...