Lamborghini Caloreclima REMOTO CRM N, Руководство пользователя

Страница: 145 / 212

3.3 Enable DHW programming
Follow the instructions below to enable DHW programming.
1. Press the button for 3 seconds.
2.
The display shows parameter
CU
.
3. Press the button until parameter P1 is displayed.
Set the desired value using the buttons / .
0 = Program disabled, continuous comfort both in summer and winter.
1 = Program enabled only in winter
2 =
Program enabled in summer and winter
3 = Program disabled, continuous economy both in summer and winter
4. Press any other button to exit the menu.
_________________________________________________________________________________________________________________________________________________
To set the automatic weekly program, proceed as described in par. “Phase2. Setting the automatic weekly program", selecting the
faucet symbol at point "1” and considering that at point "3” EC (Economy) or CO (Comfort) will be set instead of a temperature
value. In fact, the remote control has a weekly time programmer based on two levels: during COMFORT level the boiler will
keep storage at the set temperature; during the Economy level the boiler will not deliver domestic hot water. Regarding the type
of storage, refer to the boiler documentation.
Attention: Make sure the remote control is switched to Winter mode and automatic operation.
code 3541Z230 - Rev. 04 - 11/2021
EN 145