NINFA N 24 MCA
43
EN
cod. 3540P001 - 10/2008 (Rev. 00)
Press the Heating buttons to scroll the list of parameters in increasing or decreasing order. Press the DHW buttons to
modify the value of a parameter: the change will be automatically saved. The Max. Heating Power and Lighting Power
parameters can be modified in Test Mode (refer to relevant section). Press the Reset button to return to the Service
Menu. Press the Reset button for 10 seconds to exit to the card Service Menu.
"In" - Information menu
The card can display the following information
Press the Heating buttons to scroll the list of information. In case of damaged Sensor, the card will display hyphens.
Press the Reset button to return to the Service Menu. Press the Reset button for 10 seconds to exit the card Service
Menu.
"Hi" - History menu
The card can store the last 10 faults: the History datum item H1: represents the most recent fault that occurred; the
History datum item H10: represents the least recent fault that occurred.
The codes of the faults saved are also displayed in the corresponding menu of the Opentherm remote temperature con-
trol. Press the Heating buttons to scroll the list of faults. Press the DHW buttons to display the value.Press the Reset
button to return to the Service Menu. Press the Reset button for 10 seconds to exit to the card Service Menu.
"rE" - History reset
Press the Eco/comfort button for 3 seconds to delete all the faults and times stored in the History Menu: the card will
automatically exit the Service Menu, in order to confirm the operation.Press the Reset button to return to the Service
Menu.
18
P18
Comfort deactivation hysteresis (P02=1)
0-30°C
20°C
Primary setpoint (P02=2)
70-85°C
80°C
Comfort deactivation hysteresis (P02=3)
0-20°C
3°C
19
P19
Boiler shutdown in DHW
0=Fixed, 1=Linked
to setp., 2=For
Solar system1,
3=For Solar
system2
1=Linked to
setp.
20
P20
Not used
Not modifiable
4 bar/10
21
P21
Not used
Not modifiable
8 bar/10
22
P22
Legionella protection (P02=2)
0-7
0
23
P23
Not used
Not modifiable
0
24
P24
Mains Voltage Frequency
0=50Hz,1=60Hz
0=50Hz
t01
Heating NTC sensor (°C)
between 05 and 125 °C
t02
DHW NTC sensor (°C)
between 05 and 125 °C
t03
Not used (°C)
--
t04
External NTC sensor (°C)
between -30 and 70°C
(Negative values flash)
t05
Safety NTC sensor (°C)
between 05 and 125 °C
L06
Actual burner power (%)
00%=Min., 100%=Max
F07
Actual DHW drawing (Lt_min/10)
00-99 Lt_min/10
P08
Actual system water pressure (bar/10)
00=Pressure switch open,
14=Pressure switch closed
F09
Actual ionisation current (uA)
00=burner off
P10
Actual air pressure (Pa)
00-255 Pa (For Low-Nox only)
P11
Actual air pressure setpoint (Pa)
00-255 Pa (For Low-Nox only)
Remote
control
Card
Description of Transparent Parameters
Range
Default
Содержание NINFA N 24 MCA
