Lamborghini Caloreclima NINFA 32 MC, Инструкция по использованию, установке и обслуживанию, Страница: 18 / 28

NINFA 32 MC
44 GB
cod. 3540G380 - 02/2007 (Rev. 00)
“In” - Information Menu
The card can display the following information:
Table. 3
The list of information can be scrolled with the heating knob (detail 1 - fig. 1). In case of a damaged sensor, the card will
display the hyphens.
To go back to the Service Menu turn the selector (detail 3 - fig. 1) to RESET for 1 second and then to (winter) or
(summer). To exit the card Service Menu turn the selector (detail 3 - fig. 1) to RESET for 10 seconds and then to
(winter) or
(summer).
“Hi” - History Menu
The microprocessor can store the last 10 boiler faults.
The Historical datum H1 represents the most recent fault occurring whereas the Historical datum H10 represents the
least recent. The codes of the faults saved are also displayed in the relevant menu of the Opentherm remote control.
The list of faults can be scrolled with the heating knob (detail 1 - fig. 1).
Table. 4
To go back to the Service Menu just turn the selector (detail 3 - fig. 1) to RESET for 1 second and then to (winter)
or (summer). To exit the card Service Menu turn the selector (detail 3 - fig. 1) to RESET for 10 seconds and then to
(winter) or (summer).
“rE” - Reset History
Turn the selector (detail 3 - fig. 1) to RESET for 3 seconds and then to (winter) or (summer) to cancel all the
faults stored in the History Menu: the card will automatically exit the Service Menu, in order to confirm the operation.
To go back to the Service Menu just turn the selector (detail 3 - fig. 1) to RESET for 1 second and then to (winter)
or (summer).
t01 Heating NTC sensor (°C) between 05 and 125 °C
t02 DHW NTC sensor (°C) between 05 and 125 °C
t03 Not used --
t04 External NTC sensor (°C) between -30 and 70 °C (Negative values
flash)
t05 Safety NTC sensor (°C) between 05 and 125 °C
t06 Actual burner power (%) 00%=Min., 100%=Max.
t07 Actual drawing of DHW (Lt_min/10) 00-99 Lt_min/10
t09 Actual system water pressure (bar/10) 00-99 bar/10
t10 Actual ionisation current (uA) 00=burner off
H1 Fault code
H2 Fault code
H3 Fault code
H4 Fault code
H5 Fault code
H6 Fault code
H7 Fault code
H8 Fault code
H9 Fault code
H10 Fault code