LAMBERTI ELEKTRONIK DFW HZR, Руководство по эксплуатации и пусконаладке, Страница: 13 / 16

P
a
g
e
1
3
18. Adjustment values (heating specialist level)
Attention!
“Only display“ in the following charts mean, that the displayed value can not be changed!
!
To move to the heating specialist level press the keys and at the same time approximately for 5
seconds.
To move to the configuration menus E3-1 to E3-4 press the key or and acknowledge with .
Inside the configuration menus you get to the several values by pressing the keys or . If you want
to change a value acknowledge with .
The symbol appears on the display. You change a value with the keys and , accept it with
or delete the value with , the original value appears again on the display.
E3-1 Configuration / system adjustments
No Action Factory setting Range Your setting
1 Controller address 1 1 … 8
2
Controller type (only display)
3:HZR-C
2:HZR-E
---
---
3 Controller configuration (only display) --- 1 … 8 ---
E3-2 Correction value
No Action Factory setting Range Your setting
1 Correction actual room value 0.0 -2,0 … 2,0
E3-3 eBus adjustments
No Action Factory setting Range Your setting
1 eBus PKZM operation YES YES / no
E3-4 Special system information
No Action Factory setting Range Your setting
1 Hardware version (only display) --- --- ---
2 Software version (only display) --- --- ---
3 Service flag no YES / no
You can leave the respective level with the key .
19. Maintenance
The digital remote control is maintenance-free. You can occasionally clean it with a soft and dry cleaning cloth.
Attention!
No humidity may get inside the remote control!
Never use solvent-containing cleaning materials!
!
esc
Adjustment values (heating specialist level)
+
+ OK
+
OK
+ OK
esc
--
--
--
--