lamber MATIC-M-MA Series, Инструкция по эксплуатации

Страница: 19 / 80

19
b) Spread the sealant (silicone supplied by the manufacturer) onto the gasket already
predisposed on the head of one of the modules to be joined, making sure that you have
previously checked to make sure that the surfaces are clean and free of rough parts.
WARNING!: follow the procedure as indicated in the photographs below and according to the
sequence defined. Carefully clean the contact surfaces.
Check for correct
positioning and
integrity of the gasket
on the modules to be
joined.
b.1- Pay attention to correct
positioning of the gasket
especially at the corners.
b.4-Spread two lines of
silicone as shown in the
drawing for each side.
b.2- Spread the silicone on
the gasket.
b.5- Add silicone in between
the final sections of the
gasket.
b.3-Silicone all four edges of
contact.