Page
2
ALTO Room Scaffold
| Assembly Guide
Introduction
Please read these instructions carefully and ensure that you fully understand all of the information contained
herein. All of the information in this document is vital for the safe utilisation of your Alto Room Scaffold.
All Alto Access products are professional quality engineered equipment designed primarily with safety
in mind and meet or exceed all standards, recommendations and guidelines. Used properly, Alto access
equipment will keep you safe when working at height.
This manual contains all of the information necessary to correctly assemble your Alto Room Scaffold in
accordance with BS 1139-6:2014 and incorporates all of the requirements of the PASMA 3T method of
assembly as endorsed by the HSE.
This manual should be used in conjunction with your Risk Assessment and Method Statement and in line
with the Work at Height Regulations 2005 which place an obligation on employers to eliminate or minimise
risks. This manual must be made available to the user/assembler at all pertinent times.
Only competent and qualified personnel should undertake erection, dismantling or alteration, organisation,
planning or supervision of mobile access towers. In the case of any doubt, sufficient relevant additional
training must be given beforehand to ensure safe use. For further information on the use of mobile access
towers consult PASMA (www.pasma.co.uk; Tel +44 (0) 845 230 4041).
For any additional technical information or specific advice please contact the manufacturer Lakeside
Industries Limited Tel: +44 1527 500577 or Email: [email protected].
Certifications
The Alto Room Scaffold is a mobile access tower outside the scope of EN 1004 and within the scope of BS
1139-6:2014.
This tower is manufactured in our ISO 9001 accredited facility.
This manual complies with EN 1298-IM-EN.
Maximum Safe Working Loads
The safe working load of Alto Room Scaffold is 282kg. The maximum leg load imposed by the tower on its
supporting surface is 90kg when loaded to its maximum safe working load.
In case of any queries on loadings, contact your supplier or the manufacturer - Lakeside Industries Limited,
for advice. Tel: +44 1527 500577 or Email: [email protected].
