A
Position the shelves in place, starting at the
bottom of the panels (
C
&
D
). Insert one of the
flat head screws (
H
) through the outside pilot
hole and into the shelf. Do not tighten the
screw completely. Repeat with the rest of the
shelves.
2
Turn the unit upside down. Use a screwdriver
to secure the (
H
) screws through the bottom
and into the section panels.
4
Place the base onto the bottom of the unit.
Important:
line up the guide hole in the base of
the unit with the pilot hole marked
A
on the lazy
Susan. Then, line up this pilot hole with the pilot
hole in the bottom of the unit also marked
A
.
Please note that the base and the bottom of the
unit will not connect correctly unless both pilot
holes marked
A
are in line with one another.
Insert an (
I
) screw and tighten with the screw-
driver. Rotate the guide hole to the next hole and
repeat.
Helpful hint:
After you’ve aligned the two pilot
holes marked
A
by sight, use the (
I
) screw as a
guide to make sure that both holes connect
together.
5
Place the top of the unit onto the panels.
Secure the top of the unit with 6 (
H
)
screws. Then, insert the remaining screws
for the shelves and tighten.
3
2
