3
D
M4*14mm
1x
4x
RAISED INSTALLATION -
Panel Pack 5
2
Assemble the panel fixing rods to the feet.
3x
Screw feet to underside of tray & fit fixing rods to suit the
number & position of panels being used.
a: Ensure the panel fixing rod is located at 90° to the
edge of the tray as shown above.
b: Ensure the face of the panel fixing rod is lined up with
outside edge of the tray as shown above.
Parts Supplied:
3 - 4
1
3
4
5
6
M4*14mm
44x
11x
Ø3.5mm
Turn the tray over and use the cardboard packaging as a
protective mat. Note the circles that have been marked to
indicate feet position. The symbol indicates where you
should fix the feet with the panel fixing rod.
When all of the feet have been fitted, the feet in the
corner positions should be adjusted to 100mm.
Reinforced Area :
Holes in this area
drill Ø3.5 x 13/18mm deep.
Leg fixing hole (non reinforced):
Drill Ø3.5 x 5mm MAX deep.
b
a
