Lakeland STACK-A-SNACK, Инструкция пользователя

Страница: 8 / 32

8
INSTRUCTIONS FOR USE
We recommend placing the Stack-a-Snack on a heatproof board or baking tray to catch
any juices that may escape during cooking.
Plug into the socket and switch on. The orange power light will come on to show the
Stack-a-Snack is switched on.
For ease, the product has one temperature setting. After a few minutes, the green ready
light will come on to show the hotplates have heated up and the Stack-a-Snack is ready to
use.
The beauty of this hot toasted sandwich maker is trying out your favourite ingredients
and coming up with tasty new recipes adapted from the ones in this booklet. Cooking
times will vary depending on the foods you choose, so lift the lid to check, and cook for a
couple more minutes if needed. Here are two quick and easy ideas to get you started.
1
3 4
5
7
2
6
TO MAKE A BREAKFAST EGG MUFFIN
1. Lift up the lid, then lift up the upper
ring and middle plate.
2. Place the muffin base and any other
fillings inside the lower ring.
3. Lower the middle plate and upper ring,
crack your egg into the ring.
4. Place the top of the muffin directly onto
the egg.
5. Close the lid to cook. Lift the lid after 5-6
minutes to check your snack is ready. If
not, cook for a couple more minutes.
6. Pull the middle plate handle to the left
to slide it out and stack your snack
together.
7. Open the lid and lift up the rings by their
handles.
Lift your egg muffin from the hotplate
using a plastic or wooden turner. Never
use metal utensils with the
Stack-a-Snack.