8
INSTRUCTIONS FOR USE
1. Remove the charging cable and battery charger.
2. The Automatic Pot Stirrer fits most pans with
a pan diameter from 14cm to 24cm and a pan
height of 6cm to 17cm height.
3. The stirrer spindle is adjustable so it will
automatically adapt to the height of your pan.
4. Carefully lower the Automatic Pot Stirrer into
your pan and adjust the arms to the size of your pan.
5. Squeeze open the clamp on both sides to place the adjustable pan arms over the rim
of the pan. Make sure you press the bracket down thoroughly, so the surface of the
bridge touches the pan rim.
6. Let go of the clamp and it will fasten around the rim and secure the adjustable pan
arms bracket firmly.
7. You can do this either before or after adding ingredients to the pan.
8. The stirring paddle will sit slightly above the pan bottom.
9. Do not worry as this will straighten itself and align with the bottom once the paddle
starts turning.
10. If you insert the Automatic Pot Stirrer after adding ingredients to the pan, twist the
stirring paddle into the pan as far as possible until it reaches the bottom.
11. The stirring paddle will dig into the ingredients once the appliance starts turning.
12. To start stirring simply press the On/Off button.
13. The appliance will start at the speed it was set to last time it was in use.
14. To alternate between high or low speed simply press the speed button and it will
toggle between the two speeds.
15. The light indicates if you start to run out of battery. The appliance will also make a
beeping sound. To stop the beeping press the On/Off button. Remove the appliance
from the pan and recharge.
16. To stop the stirrer simply press the On/Off button.
17. Using oven gloves carefully remove the appliance from the pan by squeezing the
clamps on both sides and lift the appliance off the pan. Be careful as it will be hot.
18. Be careful of dripping hot food on the stirrer paddle.
