![background image](http://html1.mh-extra.com/html/lakeland/61781/61781_instruction-booklet_3357769007.webp)
7
INSTRUCTIONS FOR USE
• When you switch on the appliance for the first time there may be a slight burning smell,
this is normal and will stop after a few uses.
• Always make sure the speed switch is at ‘0’, then plug in and switch on the hand mixer
at the socket.
• Hold the hand mixer firmly by the handle and place it in your bowl with ingredients.
• Slide the speed switch to the first dot.
• Use the speed switch, sliding up or down to select your desired speed. Start off on the
first dot and then increase the speed as required.
• If you require a short fast burst of speed, slide the button to ‘P’ pulse whilst mixing.
• When your mixture is ready move the speed switch back to ‘0’.
• The beaters or dough hooks will continue to rotate for a few seconds after being
switched off, wait until they have fully stopped before handling.
• The beaters and dough hooks can only be removed when the speed switch is in
the ‘0’ position.
• ‘P’ pulse can also be used at the end of mixing to clean your beaters, lift them above
your mix (keeping them still in the bowl), slide to the ‘P’ and back to ‘0’ to remove
excess mixture before you finish.
• Switch off and unplug the hand mixer at the socket.
• To remove the beaters and dough hooks, hold them with one hand, press the eject
button with the other and pull to release.
WARNING
: Always switch off and unplug the appliance before you attach or remove
the beaters or dough hooks. Avoid contact with moving parts to avoid risk of injury and
damage to the appliance. Do not put your hands or utensils inside the mixing bowl while
using the hand mixer.