9
INSTRUCTIONS FOR USE
• This slow cooker has a working capacity of 5.5 litres, to allow for bubbling and
simmering.
• Prepare your ingredients. Put them inside the cooking pot and add the lid.
• The slow cooker should be at least 1/3 full.
• Place the slow cooker on a flat heat resistant surface near a socket. The slow cooker
must be used in a well ventilated area, at least 15cm away from walls and other
surfaces to allow sufficient airflow.
• Plug in and switch on the slow cooker at the socket. The slow cooker will beep, the
display will show ’88:88’ and then ‘----‘, six function dots will flash until a button is
pressed.
• When using the slow cooker for the first time you may notice a slight burning smell.
This is normal for a new heating element and will disappear after a few uses.
• Choose the setting you require – LOW, HIGH, WARM, DELAY, select the cooking time
setting according to your recipe. After setting and pressing START the unit will start
cooking automatically in 3 seconds.
• Press button ‘+’ or ‘-‘ to increase or decrease the cooking or delay time. Every
increment is 30 minutes. You can press and hold the buttons to skip quickly through
the time.
• You can adjust the cooking time at any point in the cooking process.
• DELAY default time is 2 hours. You can choose a delay time from 30 minutes to 24
hours. Please choose the delay time first and choose the function after. When you are
settings the function, the LED dot by this will flash, once set or in use it will not flash.
• LOW default time is 8 hours. You can choose a cooking time from 30 minutes to 24
hours. When you are settings the function, the LED dot by this will flash, once set or in
use it will not flash.
• HIGH default time is 4 hours. You can choose a cooking time from 30 minutes to 24
hours. When you are settings the function, the LED dot by this will flash, once set or in
use it will not flash.
• WARM default time is 12 hours. You can choose a cooking time from 30 minutes to
24 hours. When you are settings the function, the LED dot by this will flash, once set or
in use it will not flash.
• Once you have set your correct setting, the slow cooker will start automatically. The
control dial will show the delay time first, after the delay time is finished, it will then
show the cooking time instead. The LED dots by the ‘+’ and ‘-‘ will show as well as the
functions you have set.