• Insert the charger unit into the charger stand, push
down firmly until it is locked into place.
• Position the charging unit on a dry, flat surface.
• To affix to the wall, use the raw plugs and screws
provided, affixing through the 3 holes in the charger
unit (upright) part of the charging unit. Position in a
suitable place before affixing to the wall, in an area
where there are no electrical cables or water pipes
behind. No more than 1m from a mains wall electrical
socket.
• With the 2-in-1 Vacuum Cleaner fully assembled as an
upright stick vacuum, hook it on to the charging unit.
• Insert the small end of the adaptor into the side of the
charging unit. Place the power adaptor plug into the
mains wall electrical power socket and switch on.
• Only use the mains adaptor which is supplied with the
appliance.
• Fully charge the appliance before first use.
• It takes 4 to 6 hours to fully charge the battery, when
fully charged the 4 power indicator lights on the front
of the handheld vacuum part will be fully illuminated.
• The appliance cannot be activated during the charging
process.
• When fully charged the appliance will work for
approximately 1 hour, depending on power setting.
CHARGING THE 2-IN-1 VACUUM CLEANER
8
