15
CHECKING YOUR FOOD
• We recommend checking your food during cooking and shaking ingredients gently
halfway through to prevent unevenly cooked food.
• Slide the crisper drawer out of the Dual Air Fryer using the crisper drawer handle.
• On the side which you have removed the crisper drawer from the digital display will
show ‘OPEN’.
• The Dual Air Fryer will go into a pause mode, gently shake your ingredients. When the
crisper drawer is replaced, the Dual Air Fryer will continue the cycle.
Tip
: If you set the timer to halfway through the cooking time, you hear the timer beep
five times when you have to shake the ingredients. However, this means that you have
to set the timer again to the remaining cooking time after shaking.
• Do not use metal utensils with the crisper drawer and tray, this will damage the
non-stick coating, use heat resistant plastic or wooden utensils if you need to turn
your food.
•
When checking ingredients, place the crisper drawer on a heat resistant surface.
• Temperatures and timings can be altered during the cooking cycle if your food needs
longer.
• You can change the time or temperature during the air frying process using the
and icons. You cannot adjust the time and temperature while the process is
paused and the crisper drawer is open.
• When the cooking has finished, the Dual Air Fryer will beep five times and the control
panel will show ‘OFF’ on the display, depending on the side you are using.
• Check your food is ready. If not, slide the crisper drawer back into the cooking cavity
and set the time for an additional 5 minutes.
• When removing food,
DO NOT
turn the crisper drawer upside down as any hot oil
residue which has drained into the bottom of the crisper drawer will spill onto your
food.
• Depending on the type of food you have cooked, hot steam may escape from the
crisper drawer.
• Place the crisper drawer on a heat resistant surface, remove the your food onto a
plate with tongs.
• The motor fan may continue to run until the appliance has cooled down. When the fan
has stopped, switch off and unplug at the socket.
• Allow the appliance to cool down completely before moving, cleaning or storing,
approximately 30 minutes.
