USING THE MINCER
1.
Fit the feed screw inside the mincing chamber. The white plastic coupling goes in
first.
2.
Carefully slot the cutting blade onto the screw, sharp edges facing out, please
handle with care.
3.
Next, fit one of the mincer screens – fine, medium or coarse. The notch in the
screen fits the pin on the edge of the mincer chamber.
4.
Screw on the ring collar, turning clockwise.
5.
Slot the mincing chamber onto the power unit. Twist it anticlockwise and you will
hear the safety lock click into place.
6.
Fit the food tray onto the mincing chamber. Plug in the machine. Place a dish
beneath the mincer to catch the food.
7.
Press the on/off switch. Using the round food pusher, gently guide small pieces of
meat into the mincing chamber. Add small quantities at a time to avoid
overloading the motor. When you have finished mincing, switch off and unplug.
7.
The cutting blade is very sharp; please handle with care when assembling and
cleaning.
8.
To protect against electric shock, do not immerse the power unit, power cord or
plug in water. Do not operate with wet hands and never allow the plug or cord to
get wet.
9.
Keep hands, hair, clothing or utensils away from moving parts. Never insert
spoons, knives or other tools into the attachments. Always use food pusher
provided.
10.
Always switch off the appliance and unplug from the socket before adding or
removing attachments, after use and before cleaning.
11.
Using attachments not supplied by the manufacturer may lead to electric shock,
fire or injury.
12.
The appliance is not intended for use by children or infirm people unless they
have been adequately supervised by a responsible person to ensure that they
can use it safely. Children should be supervised to ensure that they do not play
with the appliance. It must not be left unattended during use.
13.
Do not use the appliance if the power cord or plug show any signs of damage, or
if the appliance is dropped, damaged or working incorrectly. Call the helpline on
015394 88100 to arrange a repair by an authorised repairer, or a replacement.
Never try to repair the appliance yourself as this may cause electric shock.
BEFORE USING FOR THE FIRST TIME
Carefully unpack the mincer and remove any attachments. Please note that the
sausage stuffer parts may be packed inside the pusher. Wipe the power unit with a
damp cloth, then dry. Do not immerse in water.
Wash all other parts in warm, soapy water and take care when handling the cutter
blade. Rinse then dry and wipe the mincer screens with a light coating of vegetable oil
to prevent rust developing. Place them in a sealed plastic bag or airtight tub until
needed, and then rinse before use.
Do not place any parts of the mincer in your dishwasher
Meat Mincer 15863 IB:Layout 1 15/8/11 10:40 Page 5
