7
http://www.lakeshore.com/products/ac-resistance-bridges/model-372/
Model 372 Quick Start Guide
c. Communications connection to your PC using one of the three different methods available (USB, Ethernet,
GPIB). For this example, USB is used as the connection method.
2. Turn on the Model 372 using the power switch on the back of the instrument. The default settings will display a
resistance reading for the sensor that you have connected. Even if the sensor is at room temperature, you should
see a logical resistance reading. If not, check your connections and begin troubleshooting until a logical reading
is displayed. In the example below, a 10.009 k
W
sensor reading is shown.
