Lake People DAC RS 06, Руководство пользователя

Страница: 13 / 27

13
dependend on your specific computer and/or software.
The 24/96 USB input is USB 1.1 based and normally runs without a
specific software. For the 24/192 USB circuitry a special driver is
needed which can be downloaded on our web site
www.violectric.com or www.violectric-usa.com
In order to avoid any interference caused from the host, the USB
input is fully insulated, with the signal coupled via transformer.
THE DIGITAL OUTPUT
is located on the rear panel. It is fitted with a RCA socket according to
IEC 958, unbalanced, at 75 ohms output impedance. The level at this
output however complies with AES-3-id (1 Vss).
The data word on this output is the same as on the selected input with
the identical sample rate when the resampling process is not activated.
When the resampling process is activated, the sample rate on this
output is 96 kHz.
THE ANALOG OUTPUTS
are situated on the rear panel, fitted with electronically balanced XLR
terminals, as well as RCA sockets.
The unbalanced outputs are generated from the in-phase signals of the
balanced outputs and so should not be used simultaneously when the
following input stages have impedances lower than 5 kOhm.