CAUTION: PLEASE KEEP OUR ENVIORNMENT CLEAN! BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY.
Storage Tips (Harsh
Winters
)
Extreme winter weather can reduce the life expectancy of your Batteries
1.
Extreme cold weather can dramatically reduce the life expectancy of your rechargeable Ni-Cd or Ni-Mh battery.
2.
Store your Solar Cleat inside during cold months when your dock is not in use.
3.
For best results and long-term storage follow these tips:
1.
Charge Batteries Fully on a sunny day, and before nightfall fully remove the batteries from the product
2.
Important: store batteries in a warm dry location
Installing Batteries & Cover
PO BOX 414
105 W. Simon St.
Laotto, IN 46763
Phone: 260-918-2758
Fax: 260-918-3540
E-mail [email protected]
www.lakelite.com
1. Install battery in correct position.
2. Select between High/Low brightness setting
3. Install the silicone sealing pad.
4. Install the cover with provided screws.
NOTE:
Screw the cover down to apply pressure on the seal.
This will ensure the battery compartment is fully waterproof.
NOTE:
Light is activated by darkness. (battery must be
charged to illuminate)
NOTE:
Product uses 1pcs AAA size of 1.2v NiMh Batteries. Capacity
900mA or higher Recommended
Aluminum Solar Cleat Lite
– (10”)
MODEL: LL-SCL-10-X
AAA 1.2v NiMh 900mA
High / Low Switch
Silicone Pad
Aluminum Cover
Mounting Hardware Suggestions
Application
Hardware
Stainless Steel Recommended
No Through Hole
5/16” Lag Bolts x Necessary Length with
5/16” Washers
No Through Hole
3/8” Lag Bolts x necessary Length with
3/8” Washers
Through Hole
5/16” Bolts X Necessary Length with
5/16” Washers & 5/16” Nuts
Through Hole
3/8” Bolts X Necessary Length with 3/8”
Washers & 3/8” Nuts
1
2
3
4
NEW:
Watch Online
Installation Video!
