Attach the ballast pole to the bottom of the buoy with the
4 large hex bolts and lock washers.
7
8
Use the provided wrench and screws to secure the silicone
pad and battery cover. Fully tighten screws to ensure the
chamber is water proof.
PO BOX 414
105 W. Simon St.
Laotto, IN 46763
Phone: 260-918-2758
Fax: 260-918-3540
E-mail [email protected]
Use the provided foam tape in the channel around the top
of the buoy. Be sure to overlap the two ends slightly.
3.2v LiFePo4
3000mA
Battery
Silicone Pad
Battery Cover
Cover Screws
5
6
www.lakelite.com
www.solarpilinglites.com
Alan Wrench
Use provided wrench and top screws to attach the light to
the buoy top. The seal must be in the correct position
before tightening down the top to the base.
Foam Tape
SOLAR REGULATORY BUOY
MODEL: LL-BUOY-P
