Laird Sentrius RM191, Быстрый старт

Страница: 17 / 24

https://www.lairdconnect.com/wireless-
modules/ramp-ism-modules
17 Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
To set up the DVK-RM1xx to send data to the cloud, follow these steps:
1. Connect the DVK-RM1xx to a PC via the USB connector on the board ( Figure 24 ).
Figure 24: Connect the DVK-RM1xx to the PC
2. Download UwTerminalX (version 1.06) from the following site:
https://github.com/LairdCP/UwTerminalX/releases/tag/v1.06
3. Download RM1xx-defs.h and lora.app.us.sb (or lora.app.eu.sb ) from https://github.com/LairdCP/RM1xx-Applications .
Place them in the same directory on your PC.
4. Use UwTerminalX to configure the RM1xx by doing the following:
a. Open UwTerminalX.
b. Click Accept ( Figure 25 ).
Figure 25: UwTerminalX
c. On the Config tab, select RM186/RM191 from the Device drop-down menu.
d. Select the virtual COM port that corresponds to your RM186/RM191 development board ( Figure 26 ).