Laird Sentrius MG100, Руководство по началу работы

Страница: 8 / 10

https://www.lairdconnect.com/ 8
© Copyright 2022 Laird Connectivity
All Rights Reserved
Americas : +1-800-492-2320
Europe : +44-1628-858-940
Hong Kong : +852-2762-4823
To verify this demo works and MQTT messages are being received by AWS IoT Core, follow the instructions on our
documentation site.
▪
https://lairdcp.github.io/guides/ble-gateway-firmware/1.0/docs/aws_iot#monitor-aws-messages
To access the console or serial port of the device, plug in a USB to Micro USB cable between your PC and the MG100. Next
use your favorite serial or terminal program with the following settings to initiate a proper connection as explained in
Set up
your hardware .
Figure 2: MG100 terminal settings
At initial boot up you will be presented with a command line interface as well as debug output. The command line interface has
an interactive help menu to guide you through the various commands and parameters you can use.