Laird Lyra S, Руководство пользователя

Страница: 4 / 17

https://www.lairdconnect.com/ 4
© Copyright 2022 Laird Connectivity
All Rights Reserved
Americas : +1-800-492-2320
Europe : +44-1628-858-940
Hong Kong : +852-2762-4823
The Lyra S Development Kit is an ultra-low cost, small form factor development and evaluation platform for the Lyra S
Wireless Bluetooth® Module.
The Lyra S Development Kit is focused on rapid prototyping and concept creation of IoT applications. It is designed around the
Lyra S Module, based on the EFR32BG22 System-on-Chip, which is an ideal device family for developing energy-friendly
connected IoT applications.
The kit features a USB interface, an on-board SEGGER J-Link debugger, one user-LED and button, and support for hardware
add-on boards via a mikroBus socket and a Qwiic connector. The hardware add-on support allows developers to create and
prototype applications using a virtually endless combination of off-the-shelf boards from mikroE, sparkfun, AdaFruit, and
Seeed Studios.
Module
▪
Lyra S Wireless Bluetooth® Module
▪
High performance 2.4 GHz radio
▪
32-bit ARM® Cortex®-M33 with 76.8 MHz maximum operating frequency
▪
512 kB flash and 32 kB RAM
Features
▪
User LED and push button
▪
20-pin 2.54 mm breakout pads
▪ mikroBUS™ socket
▪
Qwiic® connector
▪
SEGGER J-Link on-board debugger
▪
Virtual COM port
▪
Packet Trace Interface (PTI)
▪
USB-powered
▪
MHF4 RF connector to route RF form Lyra S module to an External Antenna (see 11 Routing RF to
External Antenna on J3 RF connector )
▪
Software Development Selection Switch SW1 to select between 2 options (AT/BGx or C-DEV)
–
SEE
NOTE BELOW .
Note: Versions of the development board silkscreen prior to v2.3 may list SW1 as BGx or
AT/SWO. On these boards, BGx should be understood to be AT/BGx and AT/SWO should
be understood to be C-DEV. See 6 Software Development Selection Switch SW1.
Software
▪
AT Command Set - Fully featured and extensible, proven over 5+ years. Simplest implementation
with all key Wireless Xpress features, proven over 5 years
▪
Wireless Xpress - Frozen at current release, path for existing Silicon Labs customers. Secure FOTA-
capable firmware, Xpress command API for iOS/Android
▪
C Code - Full software development with Silicon Labs SDK and toolchain. Use Simplicity Studio IDE
for full functionality of Silicon Labs HW/SW
Part Number Description
453-00091-K1 Lyra Series - Development Kit - Bluetooth v5.3 SIP Module with various antenna options
Applicable to following Lyra S module part number:
Part Number Product Description
453-00091R Lyra Series - Bluetooth v5.3 SIP Module with various antenna options
– Tape / Reel
453-00091C Lyra Series - Bluetooth v5.3 SIP Module with various antenna options
– Cut / Tape