Laird LTM-4x4HDSDI, Руководство пользователя, Страница: 9 / 26

Connecting Your LTM-4x4HDSDI 4x4 HD-SDI / SDI Router
6
6 Connecting Your LTM-4x4HDSDI 4x4 HD-SDI / SDI Router
You can use your
LTM-4x4HDSDI
to switch one of the four standard
definition / high definition SDI inputs to any or all of the four standard
definition / high definition SDI outputs, as the illustration in Figure 2 shows.
To connect the
LTM-4x4HDSDI
4x4 HD-SDI / SDI Router , do the
following
1
:
1. Connect up to four SDI sources to the SDI INPUT BNC connectors (for
example, an HD/SD SDI camera to input 1 and an HD video player to input 4).
2. Connect the SDI OUTPUT BNC connectors to up to
2
four SDI acceptors
(for example, output 1 to a Preview monitor, and output 4 to an HD SDI
mixer).
3. Set the dipswitches (see section 6.1).
4. As an option
3
, connect:
A Genlock source to the GENLOCK BNC connector
The LOOP BNC connector to the GENLOCK connector of the next
unit in the line, and release the TERM button for looping
4
5. Connect a PC and/or controller (if required), to the:
RS-232 port (see section 6.2), and/or
RS-485 port (see section 6.3), and/or
ETHERNET connector (see section 6.4)
6. As an option
3
, connect a remote dry contact switch (refer to section 6.5)
7. Connect the power cord
5
.
The example in Figure 2 illustrates how to connect your
LTM-4x4HDSDI
:
1 Switch OFF the power on each device before connecting it to your LTM-4x4HDSDI. After connecting your
LTM-4x4HDSDI, switch on its power and then switch on the power on each device
2 When only one output is required, connect that output, and leave the other outputs unconnected
3 Not illustrated in Figure 2
4 Pushed in terminates the input. Release when the input extends to another unit
5 We recommend that you use only the power cord that is supplied with this machine