Sterling-LWB(5) SD Card Board
User Guide
Embedded Wireless Solutions Support
Center: http://ews-support.lairdtech.com
www.lairdtech.com/wireless
330-0245-R1.1
4
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
1
I
NTRODUCTION
1.1.
Purpose and Scope
The purpose of this document is to provide details regarding the setup of the Sterling-LWB and Sterling-LWB5
module on the SD card board. This document covers a description of the SD card board and its features.
1.2.
Applicable Documents
The following documents are available from the
Sterling-LWB product page
:
▪
Sterling-LWB Datasheet
▪
How-to Guide
–
Integrating Laird Sterling-LWB Wi-Fi and Bluetooth with Freescale i.MX 6 UltraLite
Evaluation Kit Under Linux
The following documents are available from the
Sterling-LWB5 product page
:
▪
Sterling-LWB5 Datasheet
▪
Sterling-LWB5 Application Guide
▪
How-to Guide
–
Integrating Laird Sterling-LWB Wi-Fi and Bluetooth with Freescale i.MX 6 UltraLite
Evaluation Kit Under Linux
–
Note: This guide also works for the Sterling-LWB5.
2
S
TERLING
-LWB
(5)
SD
C
ARD
B
OARD
D
ESCRIPTION
The Sterling-LWB & Sterling-LWB5 SD Card development board is an evaluation and development board for the
Laird Sterling-LWB and Sterling-LWB5 module. It connects to a standard SDIO card slot on a host board and can
be powered directly from the SD card slot or from an external power supply. Additionally, it brings out all
necessary GPIO pins for Wi-Fi operation and all necessary pins for Bluetooth operation including PCM audio pins.
This allows the board to be connected to any development board with an available SD card slot. The board
allows for quick prototyping of designs using the Laird Sterling-LWB and Sterling-LWB5 modules.
Figure 1: Sterling-LWB Chip Antenna SD card board
