Laird LA 5000 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 41

Laird LA 5000 Скачать руководство пользователя страница 29

Maintenance and Cleaning

Cleaning of Strainer

29

Laird Thermal Systems s.r.o

Operation Manual, 387009851

Date: 08/09/2022

Version: 1.0

Liquid-Air Cooling Unit LA 5000

387009381

9.4 Cleaning of Strainer

Fig. 11:

Locations of ball valve and strainer

1 Strainer cover

2 Ball valve

1)

Disconnect the unit from mains.

2)

Remove the side panel.

3)

Close the ball valve.

CAUTION

A small amount of coolant will leak from the pump.

Use a cloth or an appropriate vessel for absorption.

4)

Remove the strainer cover using a metric AF24 wrench.

5)

Take off the strainer and clean it. In case of damage the strainer must be replaced.

6)

Remount the strainer and screw on the cover.

7)

Re-open the ball valve.

8)

Should any coolant leak from the strainer the cover must be screwed on using a little more force.

9)

Remount the side panel.

CAUTION

Risk of damage to the pump, if the unit is operated with a fully closed ball valve!

Never start the unit, when the ball valve is closed.

1

2

«
...
27
28
29
30
31
...
»

Содержание LA 5000










































Отзывы:

Нет отзывов