Laird BT740-SA, Руководство по интеграции оборудования

Страница: 29 / 32

Enhanced Class 1 Bluetooth v2.1 Module
Hardware Integration Guide
Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/bluetooth
29 CONN-HIG-BT740
11 B
LUETOOTH
SIG A
PPROVALS
11.1 Subsystem Combinations
This application note covers the procedure for generating a new Declaration ID for a Subsystem combination
on the Bluetooth SIG website. In the instance of subsystems, a member can combine two or more subsystems
to create a complete Bluetooth End Product solution.
Subsystem listings referenced as an example:
Design
Name
Owner
Declaration
ID
Link to listing on the SIG website
BT740 Laird B020701 https://www.bluetooth.org/tpg/QLI_viewQDL.cfm?qid=20701
Interface
Express
subsystem Cambridge
Consultants
Ltd B017578 https://www.bluetooth.org/tpg/QLI_viewQDL.cfm?qid=17578
11.2 Assumptions
This procedure assumes that the member is simply combining two subsystems to create a new design,
without any modification to the existing, qualified subsystems. This is achieved by using the listing interface
on the Bluetooth SIG website.
Figure 11-1 shows the basic subsystem combination of a controller and host
subsystem. The controller provides the RF/BB/LM and HCI layers, with the host providing L2CAP, SDP, GAP,
RFCOMM/SPP and any other specific protocols and profiles existing in the host subsystem listing. The design
may also include a profile subsystem.
Figure 11-1: Basic subsystem combination of a controller and host subsystem
The qualification process requires each company to registered as a member of the Bluetooth SIG –
www.bluetooth.org