Laird BL654, Руководство пользователя

Страница: 22 / 38

www.lairdtech.com/bluetooth
22
© Copyright 2018 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Note: Baud rates higher than 115200 depend on the COM port capabilities of the host PC and may require an external
USB
– RS232 adapter or ExpressCard – RS232 card.
The benefits of using UwTerminalX include the following:
▪
Continually displayed status of DSR, CTS, DCD, and RI
▪
Direct control of DTR on the host PC via a check box
▪
Direct control of RTS, if CTS / RTS Handshaking is disabled when UWTerminalX is launched
▪
Sending UART BREAK signals. Following provides explanation UART Break.
(
https://en.wikipedia.org/wiki/Universal_asynchronous_receiver/transmitter#Break_condition )
▪
Additional built-in features (right click in Terminal tab screen) to accelerate development including Automation and
various XCompile/Load/Run options for downloading
smart BASIC applications into the BL654.
Note: Full details on smart BASIC are available in the smart BASIC User Guide available at the Laird product page for
BL654, along with a document giving a basic introduction to UwTerminalX. A help file is included with
UwTerminalX that gives an overview of the program. Visit the BL654 product page at
http://www.lairdtech.com/products/bl654-ble-thread-nfc-modules.
Tip: If the module returns a four-hex digit error code:
In UwTerminalX, select those four digits, right-click, and select
Lookup Selected Error-Code (Hex) . A description
of the error is then printed on screen.
Access to all 48 BL654 series module signal pins (SIO’s = Signal Input /Output) is available on plated-through holes (for 2.54
mm pitch header connectors) on J44, J47, J48, J41, J29, J1, J12, J1, J5, J17, J21, J6, and J36.
Note: The BL654 module signal pins designation SIO (Signal Input /Output).
▪
DEFAULT type is DIO (Digital Input or Output) or UART (on fixed pins)
▪
ALTERNATE type is either AIN (Analog Input ADC), I2C, SPI, QSPI, DIO (on fixed pins), PWM, FREQ, and NFC
▪
DIO or AIN functionality is selected using the GpioSetFunc() function in smart BASIC
▪
I2C, UART, SPI, QSPI controlled by xxxOPEN() functions in smart BASIC
▪
SIO_05 to SIO_08 are DIO by default when $autorun$ app runs on power up
▪
SIO_09 and SIO_10 are NFC pins by default; they can be set to alternative function SIO using the GpioSetFunc()
function in
smart BASIC
These breakout connectors can interface to a wide array of sensors, the BL654 is user configurable through the smart BASIC
application script to change each SIO pin from the default function (DIO, UART) to alternate functions (AIN (ADC), I2C, SPI,
QSPI, DIO), PWM, FREQ, and NFC. The BL654 development kit incorporates additional fly-lead cables inside the box to
enable simple, hassle-free testing of these multiple interfaces.
Table 8 shows the BL654 module pins that are brought out to plated through Holes (suitable for 2.54 mm pitch headers).