Laird AC4490 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 46

background image

AC4490 User Guide

Version 4.5

Laird Connectivity Solutions Support Center:
http://ews-support.lairdtech.com

www.lairdtech.com/ramp

46

Americas: +1-800-492-2320

Europe: +44-1628-858-940

Hong Kong: +852 2923 0610

Laird Technologies is the world leader in the design and manufacture of customized, performance-critical
products for wireless and other advanced electronics applications. Laird Technologies partners with its
customers to find solutions for applications in various industries such as:



Network Equipment



Telecommunications



Data Communications



Automotive Electronics



Computers



Aerospace



Military



Medical Equipment



Consumer Electronics

Laird Technologies offers its customers unique product solutions, dedication to research and development, as
well as a seamless network of manufacturing and customer support facilities across the globe.

Copyright © 2013 Laird Technologies, Inc. All rights reserved. The information contained in this manual and the accompanying software programs are copyrighted and all rights

are reserved by Laird Technologies, Inc. Laird Technologies, Inc. reserves the right to make periodic modifications of this product without obligation to notify any person or entity

of such revision. Copying, duplicating, selling, or otherwise distributing any part of this product or accompanying documentation/software without the prior consent of an

authorized representative of Laird Technologies, Inc. is strictly prohibited.

All brands and product names in this publication are registered trademarks or trademarks of their respective holders.

This material is preliminary. Information furnished by Laird Technologies in this specification is believed to be accurate. Devices sold by Laird Technologies are covered by the

warranty and patent indemnification provisions appearing in its Terms of Sale only. Laird Technologies makes no warranty, express, statutory, and implied or by description,

regarding the information set forth herein. Laird Technologies reserve

s the right to change specifications at any time and without notice. Laird Technologies’ products are

intended for use in normal commercial and industrial applications. Applications requiring unusual environmental requirements such as military, medical life-support or life-

sustaining equipment are specifically not recommended without additional testing for such application.

Limited Warranty, Disclaimer, Limitation of Liability

«
...
44
45
46

Содержание AC4490















































Отзывы:

Нет отзывов

Похожие инструкции для AC4490

Бренд: TalkingSign Страницы: 12

Бренд: E+E Elektronik Страницы: 2

Бренд: Zenith Страницы: 44

Бренд: R.V.R. Electronica Страницы: 40

1301-1214-0010-200

Бренд: S+S Regeltechnik Страницы: 32

Бренд: Tachosys Страницы: 17

Бренд: D+M Group Страницы: 24

Бренд: Feasycom Страницы: 3

Бренд: Tactic Страницы: 2

Бренд: TV Star Страницы: 10

Бренд: Charles Страницы: 13

Kotron RF 2-Wire Series

Бренд: Magnetrol Страницы: 12

FT-450 - CAT OPERATION REFERENCE BOOK

Бренд: Yaesu Страницы: 18

CentreCOM AT-280

Бренд: Allied Telesis Страницы: 4

Бренд: Mun Ah Plastic Electronic Toys Страницы: 3

Бренд: Hall Research Technologies Страницы: 12

Бренд: Yaesu Страницы: 68

Бренд: Camille Bauer Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды