4
Repairs may become necessary over
time; these and all major servicing
o p e r a t i o n s m u s t b e p e r f o r m e d
exclusively by technicians employed
by the manufacturer or an authorized
service centre.
•
Carefully read
the directions given in this
manual; they contain important information
on safety during installation, operation and
maintenance.
Keep this manual in a safe place for
future consultation!
•
The appliance must be used only for the
purpose
for which it was expressly
designed:
i.e. cooking foods. Any other
type of use is improper and therefore
dangerous.
•
Only suitably trained kitchen personnel
should be allowed to use the appliance.
•
This appliance is not intended for use by
person (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
•
Children should be supervised to ensure
that they do not play with the appliance.
•
The oven must not be left unattended
during operation.
•
There are surfaces of the oven that become
hot during operation. Take care!
•
Ask the installer for information on correct
operation and use of the water softener;
incorrect or incomplete maintenance can
lead to the formation of scale, which can in
turn irreversibly damage the oven.
•
Should it become necessary to call
out a service technician, all essential
identification details of the appliance are
shown on the data plate, located at the
right-hand side on the bottom.
•
If the power supply cable is damaged,
it must be replaced by the manufacturer
or by its after-sales assistance service
or, however, by a person with similar
qualification, in order to prevent every risk.
•
Each appliance is equipped with a data
plate identifying the model and its main
technical specifications. An example is
given below of a dataplate for an electric
oven and one for a gas oven.
1 • AVVERTENZE GENERALI
0085
2010
EN 203/A1
AC 230V 50Hz
IT
IPX 5
G 25 / m3/h
Qn 40 kW
Cat.
II 2H3+
NR XXXXXXXXXX
kPa
200 - 500
P mbar
20; 28-30/37
TOT 1 kW
1 x 0.55 kW
G 20 / m3/h
G 30 3.16 Kg/h
Pmax / mbar
Pmax / mbar
Pmin / mbar
Pmin / mbar
Pmin / mbar
A3
B13
B23
2010
3N AC 400V 50Hz
IPX 5
NR XXXXXXXXXX
kPa
200 - 500
TOT 6.25 kW
1 x 0.25 kW
TYP. XXXXXXXX
TYP. XXXXXXXX
LOGO
LOGO
1
•
GENERAL REMINDERS
90028011rev00
