LAIKA Kreos 5009 Скачать руководство пользователя страница 37

Страница: 37 / 126

Installation and removal of the auxiliary battery

To install/remove the auxiliary battery, proceed as
follows:
Installation:
1) Make sure that all the appliances are disconnected

and the system is not energised.

2) House the battery inside the bay and fasten it by the

specific fasteners.

3) Connect the cables to the terminals, taking care to

respect polarities (red/positive - black/negative).

Removal:
1) Make sure that all the appliances are disconnected

and the system is not energised.

2) Disconnect the terminals from the battery poles,

taking care to protect the ends of the cables by the
specific caps.

3) Unlock the fasteners for battery positioning and

remove it.

7 - ELECTRIC SYSTEM (ECOVIP - KREOS)

USER’S GUIDE

Switch off all appliances and lamps before
connecting or disconnecting the auxiliary battery.

WARNING

For safety reasons, always protect the battery poles
and do not store metallic objects near the batteries
(danger of shortcircuit).

WARNING

• Bear in mind that the battery capacity is limited

and lowers considerably in winter.

• Disconnect the battery poles in case of mainte-

nance works on the electric system.

• If your vehicle is not going to be in use for a long

time please disconnect the auxiliary battery by
means of the proper switch (see below " Battery
master switch").

THINGS TO DO

• Do not overload the lines with electric optional

equipment.

• Do not leave the engine turned on when either the

engine battery or the auxiliary battery terminals
are disconnected (danger of short circuit).

THINGS TO AVOID

Содержание Kreos 5009































































































































Результаты поиска

Содержание Kreos 5009

Отзывы:

Похожие инструкции для Kreos 5009

Бренды по названию

Популярные бренды

LAIKA Kreos 5009, Руководство пользователя

Результаты поиска

Содержание Kreos 5009

Отзывы:

Похожие инструкции для Kreos 5009

Бренды по названию

Популярные бренды