LAI Games MEGA STACKER, Руководство оператора

Страница: 46 / 82

Operator's Manual
– Mega Stacker
©
LAI GAMES
Page 41
TROUBLESHOOTING GAME ERRORS

CLEARING GAME ERRORS
Game errors can be cleared, by pushing the test button ONCE. The game
will try and check if the errors are fixed. If the errors are fixed, the game
will continue as normal. If an error is not fixed, the error will remain on
the display.
For a Hard Error (Err4) Power OFF and ON the game will
clear the error.

Err1 – TICKET ERROR
This error is usually displayed if the ticket dispenser or optional capsule
dispenser does not function properly, or if tickets/capsules are jammed.
Check the ticket/capsule dispenser is full, Check the ticket/capsule
sensor/switch and make sure they are working properly, you can check
this with your hand on the Capsule dispenser to make sure the
sensor/switches are working also make sure the micro switch wiring is
connected to the Normal Open and the Common contact of the micro
switch. For a Ticket dispenser a ticket can be pushed in and out of the
sensor to test it Use the switch test to help check the sensor/switch, an
active switch will display as C1 in switch test.. Use a Digital Multimeter
to check the voltage drive from the main CPU output to the motor or
ticket/capsule connector. The error can also occur if the ticket dispenser or
optional capsule dispenser is not installed and P11, 22 and P23 have not
been set to zero.

Err2 – START/STOP BUTTON JAMMED
This error is usually displayed if the Start/Stop button is active for longer
than 30 seconds. Check the mechanical operation of the Start/Stop button
and also the micro switch. Lastly make sure the micro switch wiring is
connected to the Normal Open and the Common contact of the micro
switch.Use the Switch Test and check the Stop/Start button, an active
button will be display as
C6 .

Err3 – EEPROM ERROR
This Error means that the CPU cannot read the EEPROM, or is receiving
errors during communication with the EEPROM (The 23C16 IC on the
main MCU PCB). This could cause problems with the game audits and
program settings. The first thing to try is switch OFF and ON the machine
at least 2 times, if the message still appears then replace the EEPROM IC
Atmel 24C16 on the CPU PCB with the new EEPROM. If an Error
message is still displayed this could be a problem with the game audits and
program. If this error cannot be cleared please send your main MCU PCB
to the nearest authorized
LAI Games
Distributor for repair.

Err4 – MAJOR PRIZE DEPLOYMENT ERROR
This error is usually displayed if a Major prize compartment is selected by
a Major prize-winner and is not opened or cannot be opened before it times
out.
The error can also occur if no Major prize compartments are active.
Test the prize Door function using the Run Test. Test the prize sensor
using the Switch Test. Observe the Door Locking mechanism and check
whether the door lock is moving smoothly and that they hit both open and
closed switches alternately.