background image

22 
 

6.

 

Coin 2 Multi Bonus Credits 

Default Off, Adjustable On / Off

 

Turn on the first stage of bonus credits for coin mech 2. Turning this setting on, will activate 
settings 6-1 to 6-6. 

6.1.

 

Coin 2, Stage 1, Number of Coins 

Default Off, Adjustable Off / 1 

 99

 

This sets the number of coins that need to be inserted into coin mechanism 2 to reach the 
bonus credit stage 1. 
This setting is only active if setting 6 is ON. 

6.2.

 

Coin 2, Stage 1, Number of Bonus Credits 

Default Off, Adjustable Off / 1 

 99

 

This sets the number of bonus credits that are given when credit stage 1 is reached. 
This is the number of bonus credits given, on top of what has been paid for. 
This setting is only active if setting 6 is ON. 

6.3.

 

Coin 2, Stage 2, Number of Coins 

Default Off, Adjustable Off / 1 

 99

 

This sets the number of coins that need to be inserted into coin mechanism 2 to reach the 
bonus credit stage 2. 
This setting is only active if 6-1 and 6-2 are active. 

6.4.

 

Coin 2, Stage 2, Number of Bonus Credits 

Default Off, Adjustable Off / 1 

 99

 

This sets the number of bonus credits that are given when credit stage 2 is reached. 
This is the number of bonus credits given, on top of what has been paid for. 
This setting is only active if 6-1 and 6-2 are active 

6.5.

 

Coin 2, Stage 3, Number of Coins 

Default Off, Adjustable Off / 1 

 99

 

This sets the number of coins that need to be inserted into coin mechanism 2 to reach the 
bonus credit stage 3. 
This setting is only active if 6-3 and 6-4 are active. 

6.6.

 

Coin 2, Stage 3, Number of Bonus Credits 

Default Off, Adjustable Off / 1 

 99

 

This sets the number of bonus credits that are given when credit stage 3 is reached. 
This is the number of bonus credits given, on top of what has been paid for. 
This setting is only active if P6-3 and P6-4 are active. 

7.

 

Common Coin 

Default Off, Adjustable On / Off

 

If the setting is ON, coin 1 and coin 2 contribute to the same coin pool. If the setting is off, they 
are counted separately. 
This setting is only active is P17, Card System, is set to off. 

8.

 

Attract Sound 

Default 3 minutes, Adjustable Off, 2m, 3m, 4m, 5m, 10m, 30m

  

Controls the delay between the attract mode audio loop repeating. 

9.

 

Error Message Alert 

Default Display & Audio, Adjustable Display & Audio, Audio Only, Display 

Only, Off  

Controls how the game indicates an error has occurred. Errors can be shown on the display 
and/or with an error voice message that is played through the speakers, or hidden completely. 

10.

 

Free Mode 

Default Off, Adjustable On / Off

 

Sets if the game requires a credit to start playing. If set to on, the game can be played for free. 
 
 
 

Содержание HYPERshoot































































































Отзывы: