LAI Games Dino Duel, Руководство оператора

Страница: 38 / 46

Operator's Manual – Dino Duel
©
LAI GAMES
Page 33
CLEARING CARD JAMS
A card jam is usually happen because of two things: the lowest card in the stack
is damage so it can not be dispense, and the clutch roller needs to be clean.
1. To clear the card jam because of card damage, first remove the card
cartridge from the main chassis.
2. Open the cartridge and remove the thick weight plate from the top of the
cards’ stack.
3. Gently lift the stack of cards and check for damage cards.
4. Remove the damage cards from the stack.
5. Put the cards’ stack and the thick weight plate back into its previous position
in the cartridge.
6. Install the cartridge back into the main chassis.
„
SAFETY AND MAINTENANCE
1. Servicing and maintenance staff must be adequately trained and aware of the
hazards presented by the rollers and drive belts. The motor creates sufficient
torque through its reduction gear to trap fingers, hair and clothing.
2. Avoid the inclusion of foreign objects such as tape, rubber bands and wire as
these could cause the machine to jam.
3. Keep mechanism clear of contaminants. Oily or adhesive substances will
seriously affect the performance of the dispenser.
4. Recalibration should not be carried out by untrained personnel. Calibration
details are recorded on the side of the dispenser either as a card code
consisting of three letters (this code is unique to each customer’s cards) or the
card thickness in millimeters.
5. Routine maintenance should be undertaken every 2 months or 10,000
operations whichever is the sooner.
6. Wipe the surface of the clutch roller (at the base of the card stack) with an
alcohol-impregnated cloth or pad.
7. Clean dust from the opto-sensor (mounted at the front of the mechanism below
the payout point) with a small brush or suitable aerosol duster.
8. Check the drive belts for wear and adjustment (1-2mm deflection when light
pressure is applied to the longest edge).
9. Check for accurate dispensing as incorrect adjustment for card thickness can
cause accelerated wear on the mechanism.
* NOTE! *
For cleaning the clutch roller, please check the Safety and Maintenance section.