Lahoux Optics Horus, Руководство пользователя

Страница: 12 / 24

10
3 Mounting instructions
The Lahoux HORUS can be mounted to a primary or binocular optic by means of the
thread adapter ring at the rear. Alternatively, an AD-545-X clamping adapter can be
used (sold separately).
3.1 Using the mounting thread
The Lahoux HORUS can be mounted directly to a primary optic if the primary optic
has an M52x0.75 lens thread.
1. Assure the primary optic is suitable for mounting a thermal attachment before conti-
nuing. Consult your reseller or the primary optics manufacturer if unsure.
2. Screw the thread adapter ring of the Lahoux HORUS at least 4mm into the lens
thread of the primary optic. It is advisable to screw the Lahoux HORUS into the
thread as far as possible.
3. Rotate the Lahoux HORUS for a proper orientation with respect to the primary
optic.
4. Use the knurled stop ring on the thread adapter ring to fix the Lahoux HORUS in
position, Hand-tight only. Use the supplied key only to loosen the stop ring.
3.2 Mounting the Lahoux HORUS with an AD-545-X
adapter
The AD-545-X adapters comes in various size options, in order to suit many differ-
ent primary magnifying optics. Please specify the intended primary optic brand and
model when ordering. If the brand and model are unknown or uncommon, specify the
outer diameter of the primary optic objective lens.
The AD-545-X part number has a -X suffix, where -X stands for the primary objective
lens diameter it was designed for. For example, a spotting scope with a 62mm outer
diameter would require an AD-545-62 adapter.
AD-545-X
Stub screw
Locking ring
Tightness adjustment
Thread adapter ring