laguna WBSCH, Руководство пользователя, Страница: 6 / 9

(FIG. 13)
From under the table, re-install the flat washers and
bolts previously removed as step 6, and tighten with
a 12mm wrench.
(FIG. 14)
Place a straightedge on the table and vise face.
Manually adjust the vise face, so it is leveled with
the table top then firmly tighten the screw (No. L) to
secure the vise face in position. With the vise face
leveled with the table top, secure the screw
assembly to the vise face with 4 wood screws (No.
N).
(FIG. 15)
Remove the end cap of handle (No. Q) from both
ends of one vise handle (No. Q) then insert the
handle through handle holder as shown and glue
the caps back on the handle using the supplied
glue tube.
Repeat steps 12 to step 15 with the second screw
assembly on the front edge of the workbench.