laguna T Flux 10, Руководство пользователя

Страница: 20 / 48

10HP Stationary Dust Cyclone Manual
19
Step Ten: Attach the one end of the black flex hose to the vacuum tube on
the cyclone funnel and the other end to the top end of the vacuum suction
tube connector. Secure and fix the flex hose with the hose clamps.
Step Eleven: Take the drum lid vacuum suction tube and attach to the drum
lid using (2) 1/4”*3/4” hex bolts and (2) 1/4”*OD19*2t flat washers.
Step Eleven: Take the drum lid and apply the 3*6mm foam tape provided to
two square center openings. Go along the inner ring and avoid covering the
bolt holes.
Step Twelve: Secure the latch base plate to the front side of the drum lid using
(2) 3/16”*3/8” round head bolts.
Make sure that the end with
the vacuum suction tube is
facing the back, away from the
control panel side.